I think we've all done our fair share of looking at Whisper Rooms, or similar branded sound booths. For us starting out that price tag is... yeah. So we start looking at other options. I'd run across one site that just sells the plans for a Whisper Room like construction for around $60. Not too bad, if you also have the skills or access to equipment and labor for the construction. With some more digging I ran across VocalBooth To Go.
I believe it was on YouTube that I found it, but there they have two videos showing how to build a PVC frame to hang their specialty blankets from. It's a super simple design and easy to construct with just the items you can find at a Lowe's or Home Depot. Seeing as how I needed to get away from the HVAC that I had setup near originally, I figured it was time to clear out the workroom in the basement to make room for the new booth.
First things first, off to Lowe's to get the materials!
I decided to buy 10 poles instead of 8, just in case I screwed up something. I did a lot of pre-planning and sketching but I always want to make sure I have what I need. It's always frustrating to be knee deep into a project and find out you don't have enough material.
Next I marked out the length of all the pieces I'd need to construct the top and bottom frames, then used the PVC Pipe cutter to get everything I needed. What's great is that you can get just about everything you need from the poles. I think I did have to dip into the ninth pole because I miscalculated one cut. Again, glad I bought more!
The first video provided by VocalBooth To Go makes a 3x3x6 booth. I wanted a bit more room than that to accommodate the arm of my mic, so I decided to make a 4x4x6 instead. I did some mathing and edited their original design (based off their video on how to expand the booth to anysize you need) to get to that size. Spoiler, I failed at the mathing and instead made a 4x3.5x6. Not sure how that happened. But, it worked out for me in the end so I can't complain.
Here is a list of all the lengths and cuts of material you'll need. (Note, this is to make my LxW booth. Some of your measurements may vary depending on what you need.)
And there it is. Everything is put together and in place. I put down some anti-fatigue mat foam to help my poor feet and to also combat reflections from coming off the concrete floor.
After this its as simple as putting in the grommets on the blankets and zip tying them to the frame. I put the back blanket on first and then for the front, slightly overlapped them, tying end grommets over one another in order to have a slit doorway. Once all that was done, I threw another, thinner blanket over the top!
I haven't been able to test it out just yet. But the location is what has been most important. It's in a finished basement with four concrete walls and underground. There is another door between the booth and the living area. I'm now several walls and dozen of feet away from the HVAC system and water pipes (which I used to be RIGHT NEXT to).
I'm pumped to see how it goes. Maybe I'll get a sample recording and put it up here. I'll need to, because I know for certain my FX stack is about to have some major changes to accommodate the new space.